• Manual
  • Video gallery
  • Software updates

Gear positions

Select an appropriate gear position depending on the direction in which the car is to travel.

Changing gear

Change the gear position by pushing the spring-loaded lever forwards or back. The brake pedal must be depressed to be able to change gear.

 Note

It is possible to change between D/R at very low speed without your foot on the brake in order to facilitate parking, for example.

Gear positions

PS-2007-Gear shifter and gear shift modes

The driver display shows which gear position is currently in use.

The car has three different gear positions and a button for the parking brake:

R, N, D or the P button for parking brake.

Parking brake – P

PS-2007-Parking brake button
Press the button.
The symbol in the driver display illuminates when the parking brake is activated.

 Important

Check that the symbol for parking brake is illuminated when leaving the car.

 Note

The parking brake must be activated in order to be able to lock the car and arm the alarm.

In an emergency, the parking brake can be activated when the car is in motion by pressing and holding the button depressed.

The car is then braked heavily with the foot brake. Braking stops when the button is released, or if the accelerator pedal is depressed.

 Note

An acoustic signal sounds while emergency braking is active at high speeds.

Reverse position - R

Put the seatbelt on.
Depress the brake pedal.
Move the lever all the way forwards.
The car can now be reversed.

Neutral position - N

Put the seatbelt on.
Depress the brake pedal.
Move the lever one step forward or one step back.
The car now rolls freely when the brake pedal is not depressed.

Drive position - D

Put the seatbelt on.
Depress the brake pedal.
Move the lever all the way back.
The car can now be driven.

 Note

It is not possible to start the car and change gear if the charging cable is connected.

Related articles