Electronic stability control
The driver display shows this symbol when the system is engaged.
Braking from the system may be heard as a pulsing sound, and the car may accelerate more slowly than expected when applying the throttle.
- Stability function2
- Spin control and traction control system
- Electric motor drag control
- Trailer Stability Assist
Warning
- The function is supplementary driver support intended to facilitate driving and make it safer – it cannot handle all situations in all traffic, weather and road conditions.
- The driver is advised to read all sections in the Manual that relate to this function to learn about factors such as its limitations and what the driver should be aware of before using the system.
- Driver support functions are not a substitute for the driver's attention and judgement. The driver is always responsible for ensuring the car is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.
Stability function2
The function checks the driving and brake force of the wheels individually in order to stabilise the car.
Spin control and traction control system
Spin control is activate at all speeds, and prevents the wheels from slipping against the road surface during acceleration.
Traction control is active at low speeds, and can brake a slipping wheel to increase traction on the wheel on the opposite side.
Electric motor drag control
Electric motor drag control (EDC3) can prevent unintentional wheel lock-up, e.g. during electric engine braking on slippery surfaces.
Involuntary wheel locking while driving can, amongst other things, impair the driver's ability to steer the car.
Trailer Stability Assist*4
The function of Trailer Stability Assist (TSA5) is to stabilise a car with a trailer connected in situations where the combination has begun to fishtail.
