Damage should be repaired immediately to prevent further impairment of the paintwork.

Apply touch-up paint to a damaged area

If the damage has not reached down to the metal, the touch-up paint can be applied directly after the surface has been cleaned.

Apply a piece of masking tape over the damaged surface. Then remove the tape to remove any loose paint.

If the damage is down to the metal, use of a primer is appropriate. In the event of damage to a plastic surface, an adhesive primer should be used to give better results - spray into the lid of the spray can and brush on thinly.

Before painting, gentle polishing using a very fine polishing agent may be carried out locally if required (e.g. if there are any uneven edges). The surface is cleaned thoroughly and left to dry.

Stir the primer well and apply using a fine brush, a matchstick or similar. Finish off with a basecoat and clearcoat once the primer has dried.

For scratches, implement the same procedure but mask around the damaged area to protect the undamaged paintwork.

Contact Polestar Customer Support for information on touch-up pens and spray paints for touching up paintwork damage.