• Manual
  • Video gallery
  • Software updates

Replacing windscreen wiper blades

The wiper blades sweep water away from the windscreen. Together with washer fluid, they aim to clean the windscreen and ensure visibility while driving. The wiper blades can be replaced.
PS-2007-Change windshield wiper blades - step 1
PS-2007-Change windshield wiper blades - step 2
Make sure that the windscreen wipers are in service position and fold up the wiper arms. Service position is activated/deactivated via the centre display when the car is stationary and the windscreen wipers are not on.
PS-Icon grey square 1

Press the button located on the wiper blade mounting and pull straight out parallel with the wiper arm.

PS-Icon grey square 2

Slide in the new wiper blade until a "click" is heard.

Check that the blade is firmly installed.
Fold the wiper arm back towards the windscreen.

 Important

If the wiper arms in service position have been folded up from the windscreen, they must be folded back down onto the windscreen before the activation of wiping, washing or the rain sensor, as well as before driving. This is to avoid damaging the paint on the bonnet.

The wiper blades are different lengths

PS-2007-Wiper blades diffrent length

 Note

When replacing the wiper blades, note that they have different lengths. The blade on the driver's side is longer than on the passenger side.

Related articles