• Manual
  • Video gallery
  • Downloads
  • Software updates

Position lamps

Position lamps can be used so that other road users can see the car if it stops or is parked. The position lamp is switched on with the rotating ring on the stalk switch.
PS-2007-Left-side steering wheel lever-Turning ring in Position light
Stalk switch rotating ring in position lamps position.

Turn the rotating ring to the PS-1926-Left-side steering wheel lever-Position light symbol position - the front and rear position lamps are switched on (number plate lighting is switched on at the same time).

If the car is in drive mode, the daytime running lights are switched on instead of the front position lamps.

If the car is stationary but running, the rotating ring can be moved to the position lamp PS-1926-Left-side steering wheel lever-Position light symbol position from another position to switch on only the position lamps instead of other lighting.

When driving for more than 30 seconds at max. 10 km/h (approx. 6 mph), or if the speed exceeds 10 km/h (approx. 6 mph), the daytime running lights are switched on. The driver should then turn to a position other than PS-1926-Left-side steering wheel lever-Position light symbol.

If the tailgate is opened when it is dark outside, the rear position lamps come on (if not already switched on) to warn road users approaching from behind. The position lamps illuminate for approx. 10 minutes or until the tailgate is closed.

Adaptive rear lamp function

Rear position lamp has an adaptive function. Depending on the ambient light, the light intensity of the rear position lamps is adjusted. When it is light outside the rear position lamps light more brightly so that other vehicles can see them more clearly. To prevent dazzling other vehicles when it is dark outside, the rear position lamps become dimmer.

The number plate lighting and trailer lighting are not affected by the adaptive function.

Related articles