• Manual
  • Software updates

Connect key to user profile

It is possible to connect your key to a profile. The profile along with all of its settings will then be automatically selected every time the car is used with that specific key.

The first time the key is used, it is not linked to any specific profile. When the car is started, the Owner profile, or the last used profile, will automatically be activated.

Linking a key to a profile

 Note

If the key was previously linked to another profile, the link is moved from the previous profile to the active profile.
Tap on the initials at the top of the centre display.

Press

PS2-21w22-Profilinställningar pil

on the active profile.

Select Connect key to profile to link the selected key to a profile.

It is only possible to link a profile to the key currently being used in the car. If there are multiple keys in the car, the More than one key found. Place the key you want to connect on the backup reader. message is shown.

PS2- 2007- Backup start place in tunnel console
Backup reader's location in the tunnel console.

Disconnecting a key from a profile

Tap on PS2- 2007- Driver Profile Symbol at the top of the centre display.
Tap on the profile required.
Select Disconnect key from profile to remove the active profile from the linked key.

You can unlink a key from a profile even if the key is not inside the car.

Related articles