General information on hybrid operation
The hybrid runs like a regular car, but certain functions differ from a car that only runs on petrol. The electric motors drive the car mostly at low speeds, the petrol engine at higher speeds, as well as during more active driving.
The driver display shows some information that is unique to hybrid operation – charging information, selected drive mode, distance to empty battery as well as the hybrid batteries' charge level.
It is possible to set the car in different drive modes while driving, e.g. electric operation only or, when power is required, both electric motors and petrol engine. The car calculates a combination of drivability, driving experience, environmental impact and fuel economy according to the drive mode selected.
In order that the car should have optimal function it is important that the hybrid batteries with associated electrical drive systems, as well as the petrol engine and its drive systems, have the correct operating temperature. Battery capacity may be reduced considerably if the batteries are too cold or too hot. Preconditioning prepares the car's drive systems and the passenger compartment before departure so that both wear and energy needs during the journey are reduced. The range for the hybrid batteries increases.
The hybrid batteries which drive the electric motors are charged via a charging cable but can also be charged by gentle braking and engine braking in gear position B. The hybrid batteries can also be charged by the car's engine.
Important to know
Warning
Car without power
Bear in mind that important functions such as the brakes and power steering are inoperable when the car is without power.
Warning
Towing not permitted
Towing hybrid vehicles is not permitted since this damages the electric motors.
Exterior engine noise
Warning
High-voltage current
Warning
Do not touch anything that is not clearly described in the Manual.