• Manual
  • Video gallery
  • Downloads
  • Software updates

Engine oil

An approved engine oil must be used in order that the recommended service intervals and warranty can be applied.
PS-1926-Oil decal (Europa)

Polestar recommends:

PS-1926-Castrol Edge Professional label

 Note

It is not intended that the decals illustrated in the Manual should be exact replicas of those in the car. They are included to show their approximate appearance and locations in the car. The information that applies to your particular car can be found on the decal on the car.

 Important

  • If the engine oil is not checked regularly and the level falls too low, there is a risk of this causing serious damage to the engine.
  • An approved engine oil must be used in order that the recommended service intervals can be applied. Only use a prescribed grade of oil for both filling and oil change, otherwise there is a risk of the service life, starting characteristics, fuel consumption and environmental impact of the car being affected.
  • If engine oil of the prescribed grade and viscosity is not used, engine related components may become damaged. Polestar disclaims any liability for any such damage.

All engines are filled at the factory with a specially adapted synthetic engine oil in order to meet the engine's service interval requirements. This oil has been selected with great care, taking into account service life, startability, fuel consumption and environmental impact.

Change the engine oil and oil filter in accordance with the intervals specified in Status and Warranty. Using oil of a higher than specified grade is permitted. If the car is driven in adverse conditions, Polestar recommends using an oil of a higher grade than the one specified.

It is recommended to contact Polestar Customer Support for oil change.

Low oil level symbols

Polestar uses different systems to warn about the oil level if it is too low/high, or in the event of low oil pressure. The driver display's warning symbol for low oil pressure PS-1926-Low oil pressure symbol is used for the oil pressure sensor. For the oil level sensor, the driver is notified by the driver display warning symbol PS-1926-Driver display warning symbol and display texts. Contact Polestar Customer Support for more information.

Related articles