Park assist camera locations and surveillance areas
360° view
The 360° view function activates all parking cameras, whereupon the four sides of the car are shown simultaneously in the centre display, which helps the driver to observe what is around the car when manoeuvring at slow speeds.
- Press the screen for the desired “field of vision” of the camera, e.g. on the surface in front of/above the front camera.
A camera symbol on the centre display's car symbol indicates which of the cameras is active.
If the car is also equipped with Park Assist System then distance to detected obstacles is illustrated with fields in different colours.
The cameras can be activated automatically or manually.
Backwards
The backward-facing camera shows a wide area behind the car. Part of the bumper may also be visible.
Objects shown in the centre display may appear slightly tilted — this is normal.
Forwards
The front camera can be helpful on an exit road with limited visibility to the sides, e.g. when leaving a garage. It is active at speeds up to 25 km/h (16 mph) - following which, the front camera is switched off.
If the car does not reach 50 km/h (30 mph) and the speed falls below 22 km/h (14 mph) within 1 minute after the forward-facing camera has been extinguished, the camera is reactivated.
The sides
The side cameras can show what is along each side of the car.