Driver display
The driver display shows information about the car and driving.
The driver display contains gauges, indicators and indicator and warning symbols. The content of the driver display depends on the car's equipment, settings and which functions are active at that time.
The driver display is activated as soon as a door is opened, i.e. in ignition position 0. The driver display extinguishes after a while if it is not used. To reactivate it, proceed with one of the following:
- Activate ignition position I.
- Open one of the doors.
Warning
If the driver display should extinguish, not illuminate on activation/start or be fully or partially illegible, the car must not be used, contact Polestar Customer Support.
Warning
In the event of a fault in the driver display the information on e.g. brakes, airbags or other safety systems may not be shown. In which case, the driver cannot check the status of the car's systems or receive current warnings and information.
| On the left | In the middle | On the right |
|---|---|---|
| Speedometer | Indicator and warning symbols | Tachometer/Hybrid gauge1 |
| Trip meter | Outside temperature gauge | Gear shift indicator |
| Odometer2 | Clock | Drive mode |
| Cruise control and speed limiter information | Messages, in some cases with graphics | Fuel gauge |
| Road Sign Information | Door and seatbelt information | Hybrid battery gauge |
| – | Charging status | Distance to empty tank |
| – | Media player | Distance to empty battery |
| – | Navigation map | Instantaneous fuel consumption |
| – | Phone | App menu (activated via steering wheel keypad) |
| – | Voice control | – |