• Manual
  • Video gallery
  • Downloads
  • Software updates

Symbols and messages for electronic stability control

A number of symbols and messages regarding electronic stability control (ESC1) can be shown on the driver display. Here are some examples.
SymbolMessageSpecification
PS-1926-Roll Stability Control symbol
Constant glow for approx. 2 secondsSystem check when the engine is started.
PS-1926-Roll Stability Control symbol
Flashing lightThe system is being activated.
PS-1926-Electronic Stability Control in Sport Mode
Constant glow

Sport mode is selected.

NOTE: The system is not deactivated in this mode – it is partly reduced.

PS-1926-Roll Stability Control symbol

ESC

Temporarily off

The system has been temporarily reduced due to excessive brake temperature - the function is reactivated automatically when the brakes have cooled.
PS-1926-Roll Stability Control symbol

ESC

Service required

The system is disengaged. Stop the car in a safe place, switch off the engine and start it again.

A text message can be cleared by briefly pressing the PS-1926-Steering wheel OK button symbol button, located in the centre of the steering wheel's right-hand keypad.

If a message is still shown, contact Polestar Customer Support.

  1. 1 Electronic Stability Control

Related articles