• Manual
  • Video gallery
  • Downloads
  • Software updates

Parking assistance front and rear

Park Assist System (PAS1) has different behaviour depending on which part of the car is approaching an obstacle.

Forwards

PS-1926-Park Assist System front
The warning signal has a constant tone at less than approx. 30 cm (1 ft) from an obstacle.

The Parking Assistance System's front detectors are activated automatically when the engine is started. They are active at speeds below 10 km/h (6 mph).

The measuring range is approx. 80 cm (2.5 ft) in front of the car.

 Note

Parking assistance is deactivated when the parking brake is used or P mode is selected in a car with an automatic gearbox.

 Important

When auxiliary lamps are fitted: Remember that these must not obscure the sensors - the auxiliary lamps may then be perceived as an obstacle.

Backwards

PS-1926-Park Assist System rear
The warning signal has a constant tone at less than approx. 30 cm (1 ft) from an obstacle.

The sensors for reverse are activated if the car rolls backward without a gear engaged or when the gear lever is moved to reverse position.

The measuring range is approx. 1.5 metres (5 ft) behind the car.

  1. 1 Park Assist System

Related articles