• Manual
  • Video gallery
  • Downloads
  • Software updates

Selecting and activating Pilot Assist*1

Pilot Assist must first be selected and then activated to be able to control speed and distance and to give steering assistance.
PS-1926-Activate and start Pilot Assist
A green steering wheel indicates that Pilot Assist is providing steering assistance.

In order to start the Pilot Assist it is required that.

  • The driver's seatbelt must be buckled and the driver's door must be closed.
  • The lane's edge markings must be clear and must be detected by the car.
  • There must be a vehicle (the "target vehicle") within reasonable distance in front of the car, or the current speed must be at least 15 km/h (9 mph).
  • The speed must not exceed 140 km/h (87 mph).
  • The driver must keep his/her hands on the steering wheel.
Press ◀ (1) or ▶ (3) to scroll to the symbol for Pilot Assist PS-1926-Pilot Assist symbol (4).
The symbol is grey – Pilot Assist is in standby mode.
When Pilot Assist is selected – press the steering wheel button PS-1926-Steering wheel Activate button symbol (2) to activate.
The symbol is white – Pilot Assist is started and the current speed is stored as maximum speed.

Reactivating Pilot Assist to last stored speed

When Pilot Assist is selected – press the steering wheel button PS-1926-Steering wheel Resume button symbol to activate.
The cruise control markings and symbols in the driver display change colour from GREY to WHITE – the car will now follow the most recently stored speed again.

 Warning

A significant increase in speed may follow when the speed is resumed with the PS-1926-Steering wheel Resume button symbol steering wheel button.
  1. * Option/accessory.
  2. 1 This function can be either standard or optional, depending on market.

Related articles