Turn the rotating ring to the position - the front and rear position lamps are switched on (number plate lighting is switched on at the same time).

If the car is in drive mode, the daytime running lights are switched on instead of the front position lamps.

If the car is stationary but running, the rotating ring can be moved to the position lamp position from another position to switch on only the position lamps instead of other lighting.

When driving for more than 30 seconds at max. 10 km/h (approx. 6 mph), or if the speed exceeds 10 km/h (approx. 6 mph), the daytime running lights are switched on. The driver should then turn to a position other than .

If the tailgate is opened when it is dark outside, the rear position lamps are switched on (if not already switched on) to warn road users approaching from behind. The position lamps illuminate for approx. 10 minutes or until the tailgate is closed.