Activating and deactivating the parking brake
Activating the parking brake
Automatic activation
The parking brake is activated automatically
- if the driver unbuckles the seatbelt and/or opens the driver's door.
- when the car is switched off manually in the centre display.
- if the function Hold (braking when stationary) is activated and the car has been stationary for a while (approx. 10 minutes).
Important
Emergency brake
In an emergency, the parking brake can be activated when the car is in motion by pulling and holding down the button.
The car is then braked heavily with the foot brake. Braking stops when the button is released, or if the accelerator pedal is depressed.
Note
Deactivating the parking brake
The parking brake is deactivated automatically when a gear is selected.
If creep mode is activated, the car will drive slowly in the selected direction. If Hold (braking when stationary) is activated, the accelerator pedal must be depressed for the car to be able to drive in the selected direction.
If creep mode is deactivated, the car will not drive forwards.
Note
Symbol in the driver display
| Symbol | Specification |
|---|---|
 | Constant glow: the parking brake is activated. Flashing: a fault has arisen with parking brake. Read the message in the driver display. |