• Manual
  • Video gallery
  • Software updates

Setting the stored speed for cruise control functions

It is possible to set stored speed for the speed limiter, cruise control, adaptive cruise control* and Pilot Assist* functions.

PS2-2007-Adjust speed for Adaptive Cruise Control and Pilot Assist
PS-Icon circle 1PS-1926-Steering wheel Plus button symbol: Increases the stored speed
PS-Icon circle 2PS-1926-Steering wheel Minus button symbol: Reduces stored speed
PS-Icon circle 3Stored speed
Change a set speed with short presses on the steering wheel buttons PS-1926-Steering wheel Plus button symbol (1) or PS-1926-Steering wheel Minus button symbol (2) or by pressing and holding them.
  • Short presses: Each press changes the speed in increments of +/- 5 km/h(+/- 5 mph).
  • Press and hold: Release the button when the speed indicator (3) has moved to the desired speed.
The speed set after the last button press is stored in the memory.

Effect of the accelerator pedal

If the driver increases the car's speed using the accelerator pedal before pressing the steering wheel button PS-1926-Steering wheel Plus button symbol (1), the speed stored will be the car's speed when the button is depressed, provided the driver's foot is on the accelerator pedal at the moment when the button is depressed.

A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not affect the setting - the car returns to the last stored speed when the accelerator pedal is released.

Possible speed

Note that the lowest programmable speed is 30 km/h(20 mph) – even though it is capable of following another vehicle down to 0 km/h, a speed lower than 30 km/h(20 mph) cannot be selected/stored.

The driver support functions can follow another vehicle at speeds from 0 km/h up to 200 km/h(125 mph).

Pilot Assist can give steering assistance from almost stationary up to 140 km/h(87 mph).

  1. * Option/accessory.

Related articles