Switching target vehicles with driver support
The driver support functions Adaptive Cruise Control* and Pilot Assist* have a function that allows switching target vehicles at certain speeds.
Switching target vehicles
When driver support is actively following another vehicle at speeds under 30 km/h (20 mph) and switches targets from a moving vehicle to a stationary vehicle, driver support will brake for the stationary vehicle.
Warning
When driver support follows another vehicle at speeds over approx. 30 km/h (20 mph) and changes target vehicle – from a moving vehicle to a stationary one – driver support will ignore the stationary vehicle and instead accelerate to the stored speed.
- The driver must then intervene and apply the brakes.
Automatic standby mode when switching targets
Driver support disengages and goes into standby mode if:
- your vehicle's speed goes under 5 km/h (3 mph) and driver support cannot determine if the target is a stationary vehicle or if it is another object, e.g. a speed bump.
- your vehicle's speed goes under 5 km/h (3 mph) and the vehicle ahead turns so that driver support no longer has a vehicle to follow.