Gear selector positions
Select a suitable gear selector position for the direction of travel.
Selecting gears
Switch gear selector position by moving the spring-loaded gear selector forward or rearward. The brake pedal must be depressed to change gear position.
Note
To facilitate parking and other low-speed maneuvers, the gear selector can be moved between D and R at very low speeds without depressing the brake pedal.
Gear selector positions
The instrument panel shows the gear currently in use.
The vehicle has three different gear selector positions and a button for the parking brake:
R, N, D or P button for the parking brake.
Parking brake – P
Tap the button.
The symbol in the instrument panel will illuminate when the parking brake is activated.
Important
Make sure that the parking brake symbol is illuminated when you leave the vehicle.
Note
The parking brake must be activated in order to lock the vehicle and arm the alarm.
In an emergency, the parking brake can be activated when the vehicle is moving by pressing and holding in the button.
The brakes will then be applied with force in order to brake the vehicle. The braking process is canceled when the button is released or if the accelerator pedal is depressed.
Note
In case of emergency braking at high speeds, a signal sounds during the brake procedure.
Reverse - R
Buckle your seat belt.
Depress the brake pedal.
Move the gear selector all the way forward.
You can now back up.
Neutral - N
Buckle your seat belt.
Depress the brake pedal.
Move the gear selector one step forward or one step rearward.
The vehicle will now roll freely when the brake pedal is not depressed.
D drive mode
Buckle your seat belt.
Depress the brake pedal.
Move the gear selector all the way rearward.
You can now drive.
Note
It is not possible to start the vehicle or switch gear positions when the charging cable is plugged in.