Ground fault breaker in charging cable
The charging cable1 has a circuit breaker that helps protect against current overloads and thermal overheating.
Warning
The vehicle may only be charged from approved, grounded wall outlets. If the electrical circuit or electrical socket's capacity is not known, let a licensed electrician inspect the electrical circuit's capacity. Using a charge level that exceeds the electrical circuit's or electrical outlet's capacity may start a fire or damage the electrical circuit.
Warning
The charging cable's internal current breaker helps protect the vehicle's charging system but cannot ensure that a current overload will never occur.
 | LED indicator |
If the control module's built-in ground fault breaker is tripped, the LED indicator will illuminate with a steady red glow – check the wall outlet. Have the outlet checked by a licensed electrician or try using another wall outlet.
Important
- Check the capacity of the socket.
- Other electronic equipment connected on the same fuse circuit must be disconnected if the total load is exceeded.
- Do not connect the charging cable if the socket is damaged.