Activating Park Assist Camera
The Park Assist Cameras (PAC1) are automatically activated when reverse gear is engaged or can be started manually using the center display's function button.
Camera view when backing up
When reverse gear is engaged, the screen shows the rear view.
Camera view when manually activating the camera
Activate the Park Assist Camera using this button in the top section of the center display.
The screen will first show the most recently used camera view. The next time the vehicle is started, the previously displayed side view will be replaced by the 360° view*.
- Illuminated button indicator light – the function is activated.
- Extinguished button indicator light – the function is deactivated.
Automatically deactivating the camera
Front view switches off when the vehicle's speed reaches 25 km/h (16 mph) to help avoid distracting the driver. It will be automatically reactivated if the vehicle's speed falls below 22 km/h (14 mph) within 1 minute as long as the vehicle's speed has not exceeded 50 km/h (31 mph).
Other camera views switch off at 15 km/h (9 mph) and are not reactivated.