• Manual
  • Video gallery
  • Software updates

Park assist camera

The Park Assist Cameras (PAC1) can display a 360° panoramic view as well as separate views for each of the four cameras: rear, front*, left* and right*. The cameras can be activated automatically or manually.
PS2-2111-Park Assist Camera view
Example camera view.
  1. PS-Icon circle 1Settings
  2. PS-Icon circle 2Trajectory lines
  3. PS-Icon circle 3Activates/deactivates all cameras to provide a 360° view
  4. PS-Icon circle 4Activates/deactivates Park Assist sensors
  5. PS-Icon circle 5Activates/deactivates auto-braking when backing up

The Park Assist Camera is a support function that is automatically activated when reverse gear is engaged. It can also be started manually in the center display.

 Warning

  • The Park Assist Cameras' ability to clearly reproduce the surroundings in all zones around the vehicle could be affected by the conditions during use.
  • Pay particular attention to people and animals near the vehicle.
  • Bear in mind that the front end of the vehicle may swing out towards oncoming traffic during the parking maneuver.
  • Objects/obstacles may be closer to the vehicle than they appear on the screen.

 Warning

  • The function is supplementary driver support intended to facilitate driving and help make it safer – it cannot handle all situations in all traffic, weather and road conditions.
  • The driver is advised to read all sections in the Manual about this function to learn of its limitations, which the driver must be aware of before using the function.
  • Driver support functions are not a substitute for the driver's attention and judgment. The driver is always responsible for ensuring the vehicle is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.
  1. 1 Park Assist Camera
  2. * Option/accessory.