Cruise control standby mode
Cruise control (CC1) can be deactivated and put in standby mode. This can take place automatically or be due to driver intervention.
Standby mode means that the function is selected in the center display but not activated. Symbol in instrument panel is extinguished and cruise control is not regulating speed.
Standby mode due to action by the driver
Cruise control will be deactivated and put in standby mode if any of the following occurs:
- The brakes are applied.
- The gear selector is moved to N.
- The vehicle is driven faster than the set speed for more than 1 minute.
The driver must then control the vehicle's speed.
Temporarily increasing speed using the accelerator pedal, e.g. when passing another vehicle, will not affect the setting. The vehicle will return to the set speed when the accelerator pedal is released.
Automatic standby mode
Adaptive Cruise Control may go into standby mode if e.g.:
- The wheels lose traction.
- The electric motor speed is too low/high.
- The temperature in the brake system becomes too high.
- The vehicle's speed goes below 30 km/h (20 mph).
The driver must then control the vehicle's speed.