Adjusting the door mirrors

To improve visibility to the rear, the door mirrors need to be adjusted to the driver's height and seating position. There are several automatic settings that can also be connected to the memory function buttons for the power seat.

Controls used for door mirrors

PS2-2007-Power door mirror control — Door mirror controls

The joystick in the drivers' door control panel is used to adjust the position of the door mirrors. The vehicle's electrical system must be active.

Press the L button for the left door mirror or R for the right door mirror. The button will light up.

Adjust the position using the joystick located between the buttons.

Press the L or R button again. The light in the button will go out.

Automatically folding door mirrors

The door mirrors can be automatically folded when driving or parking in tight spaces.

Press the L and R buttons at the same time.

Release the buttons after about 1 second. The mirrors will automatically stop when they are completely folded in.

Open the mirrors by pressing L and R at the same time. The mirrors will automatically stop when they reach the last-used setting.

Automatic folding when the vehicle is locked

The door mirrors fold in/out automatically when the vehicle is locked/unlocked. The function can be switched off via the center display.

Note

If you manually fold in the mirrors using the L and R buttons and then lock the vehicle, they will not fold out automatically when you unlock the vehicle. They must instead be folded out manually.

Restoring to original position

A mirror that has been moved out of position manually (e.g. hit or bumped into) must be electrically returned to its original position for automatic folding to function properly.

Fold in the mirrors by pressing the L and R buttons at the same time.

Open them again by pressing the L and R buttons at the same time.

Repeat the above procedure as needed.

The mirrors return to their original positions.

Tilting when parking

The door mirrors can be tilted down to help give the driver a better view along the sides of the vehicle, e.g. of the curb when parking.

Select reverse gear and press the L or R mirror button.

Please note that the button may need to be pressed twice depending on settings. When the door mirror is tilted down, the light in the button will flash. When reverse gear is disengaged, the door mirrors automatically return to their original positions.

Automatically tilting when parking

With this setting, the door mirrors will automatically tilt down when reverse gear is engaged. The folded position is preset and cannot be adjusted.

Tap

in the center display.

Tap More.

Tap Mirrors and select the desired setting.

To immediately return the door mirrors to their original position, press the L or R button twice.

Windows, glass and mirrors