Polestar 2

Charging status in the charging cable's control module

The LED light on the charging cable's control unit shows the status of ongoing charging, as well as status after completed charging1.

Control module with indicator

PS2- 2007- Electric drive-Regulated Control module cable (Europe+China) — The control module's LED2 indicator.

PS-Icon circle 1

LED indicator

LED	Status	Meaning	Recommended action
Off	Charging is not possible.	No power supply to charging cable.	Unplug the charging cable from the wall outlet. Plug the charging cable back into the wall outlet or use another wall outlet. If the problem persists, contact Polestar Customer Support.
Steady white light	Charging possible.	The charging cable is ready to be plugged into the vehicle.	If the LED indicator is white but charging is not possible: Unplug the charging cable from the charging socket. Plug the charging cable back into the charging socket. If the indicator doesn't begin flashing white within approx. 10 seconds, unplug the charging cable from both the charging socket and the wall outlet. Plug the charging cable back into the wall outlet and then to the charging socket in the vehicle. If the problem persists, contact Polestar Customer Support.
Flashing white light	Charging is in progress.	The vehicle's electronic system has initiated charging. Charging is in progress.	Wait until the vehicle is fully charged.
Steady red light	Charging is not possible.	Temporary fault.	Unplug the charging cable from the charging socket. Wait for a moment. Plug the charging cable back into the charging socket. If the problem persists, contact Polestar Customer Support.
Flashing red light	Charging is not possible.	Critical fault.	Unplug the charging cable from the charging socket and then from the wall outlet. Wait for a moment. Plug the charging cable back into the wall outlet and then to the charging socket in the vehicle. If the problem persists, contact Polestar Customer Support.

Related articles