• Manual
  • Video gallery
  • Software updates

Child restraints

Suitable child restraints should always be used when children travel in the vehicle.

Child restraint systems

PS-21w22-Safety–Infant seat US 1
Infant seat

There are three main types of child restraint systems: infant seats, convertible seats and booster cushions. They are classified according to the child's age and size.

The child restraint should be secured using a three-point seat belt, ISOFIX/LATCH anchors, top tether anchors, or a combination of one or more of the above. Always follow the instructions of the child restraint manufacturer.

PS-2007-Safety–Convertible seat US 2
Convertible seat

 Warning

A child seat should never be used in the front passenger seat of any vehicle with a front passenger airbag - not even if the "Passenger airbag off" symbol near the rear-view mirror is illuminated. If the severity of an accident were to cause the airbag to inflate, this could lead to serious injury or death to a child seated in this position.
PS-2007-Safety–Booster cushion US 1
Booster cushion

 Warning

Always refer to the child restraint manufacturer's instructions for detailed information on securing the restraint.

 Warning

  • When not in use, keep the child restraint system secured or remove it from the passenger compartment to help prevent it from injuring passengers in the event of a sudden stop or collision.
  • A small child's head represents a considerable part of its total weight and its neck is still very weak. Polestar recommends that children up to age 4 travel, properly restrained, facing rearward. In addition, Polestar recommends that children should ride facing rearward, properly restrained, as long as possible.

 Note

Be careful when installing child seats to ensure that sharp edges or protruding parts on the child seat do not damage the vehicle's interior.

Prolonged installation and use of child restraints may damage the vehicle's interior.

Automatic Locking Retractor/Emergency Locking Retractor (ALR/ELR)

To make child seat installation easier, each seat belt (except for the driver's belt) is equipped with a locking mechanism to help keep the seat belt taut.

When attaching the seat belt to a child seat:

Position the child seat and secure it using the seat belt in accordance with the manufacturer's instructions.
Pull the seat belt out as far as possible.
Insert the seat belt latch plate into the buckle (lock) in the usual way.
Release the seat belt and pull it taut around the child seat.

A sound from the seat belt retractor will be audible at this time and is normal. The belt will now be locked in place. This function is automatically disabled when the seat belt is unlocked and the belt is fully retracted.

 Warning

Do not use child safety seats or child booster cushions/backrests in the front passenger's seat. We also recommend that children who have outgrown these devices sit in the rear seat with the seat belt properly fastened.

Child restraint registration and recalls

Child restraints could be recalled for safety reasons. You must register your child restraint to be reached in a recall. To stay informed about child safety seat recalls, be sure to fill out and return the registration card that comes with new child restraints.

Child restraint recall information is readily available in both the U.S. and Canada. Information on recalls in the United States is obtained from the government’s customer center for vehicle safety at phone number 1-800-424-9393 or at https://www-odi.nhtsa.dot.gov/owners/SearchSafetyIssues. In Canada, visit the website for child safety at Transport Canada at https://www.tc.gc.ca/en/services/road/child-car-seat-safety.html.

Related articles