Wheel bolts
Only use rims that are tested and approved by Polestar and which are Polestar genuine accessories.
Check the tightening torque of the wheel bolts with a torque wrench.
Do not use lubricant on the threads of the wheel bolts.
Warning
Important
Locking wheel bolts*
To loosen or tighten the lockable wheel bolts – turn the wrench in the lock bolt until it fully engages in the code grooves. Always start with the lockable wheel bolts if the wheel shall be removed. When fitting the wheel, finish with the lock screw.
Important
When not in use, the wheel wrench must be stored in its place in the cargo area on the left-hand side behind the upper panel. It is important to remember this if the car is due to visit a workshop in order to have the tool available. If you lose the wrench, contact Polestar Customer Support.