City Safety™
Light signal in the event of a risk of collision
Warning signal in the event of a risk of collision
Distance measurement with the camera and radar unit
City Safety can help to prevent a collision or reduce the collision speed.
This function can help the driver to avoid a collision when driving in heavy traffic, for example, where changes in the traffic in front together with a loss of concentration can lead to an incident. City Safety then activates short, heavy braking and normally stops the car directly behind the vehicle in front.
The function helps the driver by automatically braking the car in the event of an imminent risk of collision if the driver does not react in time by braking and/or swerving.
City Safety is activated in situations where the driver should have started braking earlier, which is why it cannot help the driver in every situation. The function is designed to be activated as late as possible in order to avoid unnecessary intervention. Automatic braking takes place only after or at the same time as the collision warning.
The driver or passengers are not normally aware of City Safety - it only intervenes in a situation where a collision is immediately imminent.
Warning
- The function is supplementary driver support intended to facilitate driving and make it safer – it cannot handle all situations in all traffic, weather and road conditions.
- The driver is advised to read all sections in the Manual that relate to this function to learn about factors such as its limitations and what the driver should be aware of before using the system.
- Driver support functions are not a substitute for the driver's attention and judgement. The driver is always responsible for ensuring the car is driven in a safe manner, at the appropriate speed, with an appropriate distance to other vehicles, and in accordance with current traffic rules and regulations.